![](/images/pic/gatI01.png)
Equipment
Network
![](/images/pic/gatI02.png)
Data
Collection
![](/images/pic/gatI03.png)
Protocol
Analysis
![](/images/pic/gatI04.png)
Edge
Computing
![](/images/pic/gatI05.png)
Cloud
Access
![](/images/pic/gatI06.png)
Open
Interface
Home
Product
Solution
About Us
Service Support
Link Us
Equipment
Network
Data
Collection
Protocol
Analysis
Edge
Computing
Cloud
Access
Open
Interface
Switch
Hw Param: single-core CPU, 128MB storage, 1 100M Ethernet ports, 1 serial ports
Cellular Networking: 4G CAT 1 LTE, 4G CAT4 seven-mode full Netcom
WiFi networking: 2.4GHZ frequency band, 802.11b/g/n protocol (300Mbps), AP/STA/Relay mode
VPN function:PPTP VPN、L2TP VPN、Open VPN、IPSEC VPN
Application scenarios: smart factory networking, industrial system networking, self-service vending machines, self-service terminals, manufacturing equipment networking, etc.
Support 4G (TDD LTE/FDD LTE), 3G (HSPA+/CDMA2000-EVDO/TDSCDMA), GPRS and other networks, fully covering all 4G/3G networks at home and abroad. To meet the needs of wireless access, it is easy to build a wireless local area network with a rate of up to 300Mbps.
Support 6V~35V wide voltage power supply, -20℃~70℃ industrial grade wide temperature design, adapt to more application sites with power supply requirements and temperature requirements. With IO control function, making remote control easy to achieve. With its own RS-232/RS-485 serial port wireless data terminal communication function, it is more in line with the needs of industrial customers. At the same time, it also has the following characteristics:
1)Metal shell, the protection level is IP30.
2)The EMC level indicators are up to level 3.
3)The Ethernet port supports 1.5KV isolation transformer protection.
4)The serial port supports 15KV ESD protection.
1) Link detection design: Support link real-time detection, realize automatic redialing of dropped calls, and maintain long link connections.
2) Equipment fault self-healing design: Embedded hardware watchdog and software watchdog technology, equipment operation fault self-healing, to ensure the equipment maintains high availability.
3) System Security Guard: Through the system security guard, real-time detection of system status and application status, prevention and recovery of unsafe and unstable nodes of the system.
1) Data transmission security: Support L2TP, PPTP, IPSec VPN, Open VPN, and CA certificates to ensure secure data transmission.
2) Network protection security: Powerful firewall function, which can customize a full range of protection strategies according to customer needs, such as supporting SPI full state detection, Secure Shell (SSH), intrusion protection (forbidding Ping), DDoS defense, attack defense, IP -The wall function such as MAC binding protects the network from external attacks.
The WEB interface is user-friendly, with clear logic and clear at a glance, which greatly improves the efficiency of user configuration.
1) Supports reading logs locally or remotely, regardless of whether the management platform, WEB, or CLI are used, the logs read are clear and easy to understand, and the logs can help engineers quickly locate problems and improve work efficiency.
2) Querying the status information of the device router, such as CPU load, memory usage, network status, and device port status, is very important for troubleshooting.
3) Support engineers' advanced diagnosis function, which is convenient for quickly finding and repairing fault points during project construction
Support DTU serial transmission protocols such as WDTCP, WDUDP, TCP, UDP, etc., and support customized professional intelligent conversion protocols according to the needs of different industries.
The computing power of up to 880x2 DMIPs is capable of various complex calculations; the rich system resources are suitable for developing various complex applications. Adopting the open platform design concept, customers can develop corresponding APPs by themselves or by the IoT development team and load them into the routing system according to specific application scenarios and application requirements.
Software Specifications | ||
---|---|---|
Network features | network access | Support APN, VPDN |
network authentication | Support CHAP/PAP authentication | |
CAT1 network | For TDD-LTE/FDD LTE specific frequency band information, please refer to the ordering information table | |
CAT4 network |
GSM/GPRS/EDGEUMTS/HSPA+/CDMA2000-EVDO/TD-SCDMA/ TDD-LTE/FDD LTE For specific frequency band information, please refer to the ordering information table |
|
LAN protocol | ARP support | |
WAN protocol | PPP support | |
IP application | Support Ping, Trace, DHCP Server, DHCP Relay, DHCP Client, DNS relay, DDNS, Telnet | |
IP routing | Support static routing | |
WLAN optional |
Protocol standard | Support IEEE 802.11b/g/n |
Operating mode | Support AP, Client, WDS and other working modes | |
rate | Support 300Mbps | |
safety features | Support open system, shared key, WPA/WPA2 authentication | |
Support WEP/TKIP/AES encryption | ||
Transmission distance | 100m (the actual transmission distance depends on the site environment) | |
safety | Protection security | Support stateful packet inspection (SPI), prevent denial of service (DoS) attacks, filter multicast/Ping detection packets, source port mapping, destination port mapping, DMZ, access control function (ACL), IPMAC binding |
Data Security | Support L2TP VPN/PPTP VPN/IPSec VPN/ OPEN VPN | |
reliability | link detection | Support sending heartbeat detection packet detection, automatic connection when disconnected |
watchdog | Support equipment operation self-check technology, equipment operation fault self-repair | |
safety guard | Real-time care of various functional modules, pre-judgment and processing of possible errors | |
Intelligent | Integrated DTU | Support WDTCP, WDUDP, transparent TCP, transparent UDP and other protocol transmission |
Service, management and maintenance | Traffic management | Support bandwidth statistics, control, IP speed limit |
Configuration method | Support telnet, web, ssh, remote platform configuration | |
Upgrade mode log function |
Support web upgrade and remote upgrade | |
Support local system log, remote log. Important logs are saved when powered off. | ||
Network management function | Support cloud network management platform, batch management | |
maintenance tool | Ping, DNS resolution, route tracking, network interface status display, AT command test, etc. | |
Status query | System status, module status, network connection status, routing status, etc. |
Hardware Specifications | ||
---|---|---|
Interface features | Power interface | DC 6V-35V (terminal) |
Ethernet port | 1*10/100Mbps Fast Ethernet port, LAN port, 1.5KV network isolation transformer protection, FE0 (LAN) | |
Serial interface | 1 RS-232/485 interface (terminal), 15KV ESD protection | |
4G network standard |
LTE Cat4, maximum downlink rate 150Mbps, maximum uplink rate 50Mbps LTE Cat1, maximum downlink rate 10Mbps, maximum uplink rate 5Mbps |
|
SIM card holder | Drawer type card holder * 1 (large card) | |
TF card/hard disk (optional) |
Support TF card, hard disk optional | |
reset button | Pinhole reset button | |
Antenna connector | 4G/3G network: SMA x 1, WLAN: RP-SMA x 2 | |
Mechanical properties | Dimensions | 84x100x26 |
Installation method | rail type | |
shell | Metal shell (local gold) | |
Protection class | IP30 | |
Cooling method | Fanless cooling | |
weight | 280g | |
equipment power | Standby power | 80mA-120mA@12V |
Working power | 200mA-220mA@12V | |
peak power | 240mA@12.0V | |
environment humidity | environment humidity | 5% ~ 95% (no frosting) |
storage temperature | -40℃~ 85℃ | |
Operating temperature | -20℃ ~ 70℃ | |
indicator light | 1*6 indicator lights | POWER light (red), STATUS status light (green), WARN warning light (yellow), ERR error light (red light), Wi-Fi light (blue light), 3G/4G network signal strength indicator (three). blue) |
Hardware Specifications | |
order number |
WR511- |
code definition | code |
N (network type) | L: LTE, WLAN: WiFi |
M (Wireless Module) |
L07: 4G CAT4 full Netcom seven-mode (TDD-LTE and FDD-LTE, etc.), domestic version; L09: 4G CAT4 full Netcom seven-mode (TDD-LTE and FDD-LTE, etc.), overseas version; Q2S: 4G CAT1 full Netcom (Only supports TDD-LTE and FDD-LTE), domestic version. |
Example |
WR511-LL07-232 (single Ethernet port, 4G CAT4 full Netcom, 232 serial ports) WR511-LQ2S-485 (single Ethernet port, 4G CAT1 full Netcom, 485 serial ports) WR511-LL07-WLAN-485 (single Ethernet port, 4G CAT4 Full Netcom, 2.4G WIFI, 485 serial port) |
【Product Specification】WR511 Product SpecificationV1.0