![](/images/pic/gatI01.png)
Equipment
Network
![](/images/pic/gatI02.png)
Data
Collection
![](/images/pic/gatI03.png)
Protocol
Analysis
![](/images/pic/gatI04.png)
Edge
Computing
![](/images/pic/gatI05.png)
Cloud
Access
![](/images/pic/gatI06.png)
Open
Interface
Home
Product
Solution
About Us
Service Support
Link Us
Equipment
Network
Data
Collection
Protocol
Analysis
Edge
Computing
Cloud
Access
Open
Interface
Switch
Hw Param: dual-core CPU, 256MB storage, three Gigabit Ethernet ports, two serial ports
Cellular Networking: 5G Sub-6, 5G NSA, 5G SA, 4G LTE, 3G WCDMA
WiFi networking: 2.4GHZ or 5.8GHZ frequency band, 802.11b/g/n/ac protocol (1.3Gbps), AP/STA/Relay mode
VPN function:PPTP VPN、L2TP VPN、Open VPN、IPSEC VPN
Application scenarios: smart factory networking, industrial system networking, self-service vending machines, self-service terminals, manufacturing equipment networking, etc.
Support 5G (5G NSA, 5G SA), 4G (TDD LTE/FDD LTE), GPRS and other networks, fully cover all 5G/4G network frequency bands at home and abroad, support high-speed and low-latency network access.
Support 802.11b/g/ n/ac standard communication (2.4GHZ/5.8GHZ), the rate can reach as high as 300~1300Mbps. WiFi supports FAT AP (network segment isolation) and FIT AP (non-cross-network segment), and supports WiFi wireless coverage; WiFi supports STA, which can be used as a client to access the WiFi network, and WiFi-Relay is supported to achieve WiFi connection on the same network segment. Enter; realize any WiFi networking in industrial scenarios.
Support 6V~35V wide voltage power supply, -20℃~70℃ industrial grade wide temperature design, adapt to more application sites with power supply requirements and temperature requirements. With IO control function, making remote control easy to achieve. With its own RS-232/RS-485 serial port wireless data terminal communication function, it is more in line with the needs of industrial customers. At the same time, it also has the following characteristics:
1)Metal shell, the protection level is IP30.
2)The EMC level indicators are up to level 3.
3)The Ethernet port supports 1.5KV isolation transformer protection.
4)The serial port supports 15KV ESD protection.
1) Link detection design: Support link real-time detection, realize automatic redialing of dropped calls, and maintain long link connections.
2) Equipment fault self-healing design: Embedded hardware watchdog and software watchdog technology, equipment operation fault self-healing, to ensure the equipment maintains high availability.
3) System Security Guard: Through the system security guard, real-time detection of system status and application status, prevention and recovery of unsafe and unstable nodes of the system.
1) Data transmission security: Support L2TP, PPTP, IPSec VPN, Open VPN, and CA certificates to ensure secure data transmission.
2) Network protection security: Powerful firewall function, which can customize a full range of protection strategies according to customer needs, such as supporting SPI full state detection, Secure Shell (SSH), intrusion protection (forbidding Ping), DDoS defense, attack defense, IP -The wall function such as MAC binding protects the network from external attacks.
The WEB interface is user-friendly, with clear logic and clear at a glance, which greatly improves the efficiency of user configuration.
1) Supports reading logs locally or remotely, regardless of whether the management platform, WEB, or CLI are used, the logs read are clear and easy to understand, and the logs can help engineers quickly locate problems and improve work efficiency.
2) Querying the status information of the device router, such as CPU load, memory usage, network status, and device port status, is very important for troubleshooting.
3) Support engineers' advanced diagnosis function, which is convenient for quickly finding and repairing fault points during project construction
Support DTU serial transmission protocols such as WDTCP, WDUDP, TCP, UDP, etc., and support customized professional intelligent conversion protocols according to the needs of different industries.
The computing power of up to 880x2 DMIPs is capable of various complex calculations; the rich system resources are suitable for developing various complex applications. Adopting the open platform design concept, customers can develop corresponding APPs by themselves or by the IoT development team and load them into the routing system according to specific application scenarios and application requirements.
Software Specifications | ||
---|---|---|
Network features | network access | Support APN, VPDN |
network authentication | Support CHAP/PAP authentication | |
network standard |
GSM/GPRS/EDGEUMTS/HSPA+/CDMA2000-EVDO/TD-SCDMA/ TDD-LTE/FDD LTE/NR 5G For specific frequency band information, please refer to the ordering information table |
|
LAN protocol | ARP support | |
WAN protocol | PPP support | |
IP application | 支持Ping、Trace、DHCP Server 、DHCP Relay、 DHCP Client、DNS relay、DDNS 、Telnet | |
IP routing | Support static routing | |
WLAN optional |
Protocol standard | Support IEEE 802.11b/g/n |
Operating mode | Support FAT AP, FIT AP, STA, Relay and other working modes | |
Band rate | Support 2.4G/5.8G dual-band, support 300Mbps~1300Mbps optional rate | |
safety features | Support open system, shared key, WPA/WPA2 authentication | |
Support WEP/TKIP/AES encryption | ||
Transmission distance | 100~300m (the actual transmission distance depends on the site environment) | |
safety | Protection security | Support stateful packet inspection (SPI), prevent denial of service (DoS) attacks, filter multicast/Ping detection packets, source port mapping, destination port mapping, DMZ, access control function (ACL), IPMAC binding |
Data Security | Support L2TP VPN/PPTP VPN/IPSec VPN/ OPEN VPN | |
reliability | link detection | Support sending heartbeat detection packet detection, automatic connection when disconnected |
watchdog | Support equipment operation self-check technology, equipment operation fault self-repair | |
safety guard | Real-time care of various functional modules, pre-judgment and processing of possible errors | |
Intelligent | Integrated DTU | Support WDTCP, WDUDP, transparent TCP, transparent UDP and other protocol transmission |
Service, management and maintenance |
Traffic management | Support bandwidth statistics, control, IP speed limit |
Configuration method | Support telnet, web, ssh, remote platform configuration | |
Upgrade mode log function |
Support web upgrade and remote upgrade | |
Support local system log, remote log. Important logs are saved when powered off. | ||
Network management function | Support cloud network management platform, batch management | |
maintenance tool | Ping, DNS resolution, route tracking, network interface status display, AT command test, etc. | |
Status query | System status, module status, network connection status, routing status, etc. |
Hardware Specifications | ||
---|---|---|
Interface features | input power | 9V~35V (typical value 12V), two-wire terminal interface, reverse polarity protection |
network port | 3*10/100/1000BaseT(X), RJ45 connector WAN/LAN | |
5G network standard (choose one of two) |
5G Sub-6 GHZ, support 5G NSA and 5G SA modes 5G NSA downlink maximum 2.5Gbps, uplink maximum 650Mbps 5G SA downlink maximum 2.1Gbps, uplink maximum 900Mbps LTE downlink maximum 1.0Gbps uplink maximum 200Mbps WCDMA downlink maximum 42Mbps uplink maximum 5.76Mbps |
|
4G network standard (choose one of two) |
LTE Cat4, maximum downlink rate 150Mbps, maximum uplink rate 50Mbps LTE-TDD/LTE-FDD/DC-HSDPA+/HSPA/HSDPA/HSUPA/WCDMA/CDMA, etc. |
|
Antenna connector | 5G network: SMA x 4, 4G network: SMA x 2, WLAN: RP-SMA x 2 (5 in total) | |
Serial interface |
2 RS-232/485 interfaces (terminals) are optional, 15KV ESD protection Each 485 interface can be mounted with a maximum of 31 slaves (maximum 6 serial ports and 6 IOs can be expanded) |
|
SIM card holder | In-line card slot* 1 (medium card) | |
button | reset button | |
USB port | 1 USB2.0 port | |
Mechanical properties | shell | Metal shell (local gold) |
IP rating | IP30 | |
size | 40x 145 x 112 mm (in which the antenna connector is 10mm high) | |
weight | 608g (different configurations have different weights) | |
Install | DIN-rail installation | |
environment humidity | Operating temperature | -20 to 70°C |
storage temperature | -40 to 85°C | |
Relative humidity | 5 to 95% (non-condensing) | |
equipment power | Standby power | 150mA-250mA@12V |
Working power | 250mA-350mA@12V(4G)/250mA-1200mA@12V(5G) | |
peak power | 350mA@12V (4G)/625mA@12V(WIFI)/875mA@12V(WIFI+4G)/1200mA@12V(5G+WIFI) | |
indicator light | indicator light | PWR, STATUS, WARN, ERROR, WIFI, network port with indicator light |
Hardware selection | |
---|---|
order number |
WR713- |
N (network type) | N : NEW Radio (5G) , L : LTE (4G) , AP / STA : WiFi |
M (Wireless Module) |
F15: 5G full Netcom (Qualcomm module, imported) F65: 5G full Netcom (Zhanrui module, domestic) Q05: 4G CAT4 full Netcom seven modes (TDD-LTE and FDD-LTE, etc.); |
S (serial port) | 485: 485 serial port, 232: 232 serial port |
Example |
WR713-LQ05-232 (three network ports, 4G CAT4 full Netcom, 232 serial ports) WR713-NF15-485 (three network ports, 5G full Netcom imported module, 485 serial ports) WR713-NF65-AP-485 (three network ports, 5G full Netcom domestic module, 2.4G/5.8G WIFI AP, 485 serial port) WR713-AP-485 (three network ports, 2.4G/5.8G WIFI AP, 485 serial port) WR713-STA-485 (three network ports, 2.4 G/5.8G WIFI client, 485 serial port) |
【Product Specification】WR713 Product SpecificationV1.0